I/O Data - Furuno FM-8900S Installation Manual

Emergency lamp
The emergency lamp can be installed on the left or right side (default arrangement) of the rack.
For installation on the left side, unfasten the four screws from the front panel of the emergency
lamp, rotate the emergency lamp 180° then refasten the screws.
1. Remove four screws from the right or left side of the rack.
2. Fasten the emergency lamp to the rack, with the four screws removed at step 1.
3. Insert the cable from the emergency lamp base into the cable entry of the rack. Connect the
cable to the terminal board, referring to the interconnection diagram at the back of this manual.
4. Connect the emergency lamp connector to the emergency lamp.
2.13

I/O Data

Data
Position info, Position fix
Time info
DSC information, Expanded DSC
Target Latitude and Longitude
Equipment information
* The TLL sentence can be output by selecting [TLL-S] on the [OTHER] menu of the [SERVICE]
menu.
Emergency lamp
Input/Output
Input
Input
Output
Output
Input/Output
17
2. CONNECTIONS
Cable entry
Sentence, priority order
GNS>GGA>RMC>GLL
ZDA>RMC
DSC, DSE
TLL*
PFEC