Universal Wall Mounting Bracket - Motorola MC9500-K Integrator Manual

Universal Wall Mounting Bracket

Use the Universal Wall Mounting Bracket to mount a Four Bay Ethernet cradle, Four Bay Charge Only cradle or
two Four Slot Battery Chargers on a wall.
Mounting Hole
Mounting Hole
Universal Wall Mounting Bracket
Figure 2-3
NOTE Use fasteners appropriate for the type of wall and the Universal Wall Mount Bracket mounting slots.
For mounting on metal surfaces, it is recommended to use 4 mm or #8 pan head machine screws with a
minimum thread engagement of the screw size (diameter).
For mounting on non-metal surfaces, it is recommended to use 4.8 mm or #10 pan head self-tapping screws
with suitable length and wall plug.
To attach the Universal Wall Mounting Bracket to the wall:
Place the template (supplied with the Universal Wall Mounting Bracket) onto the wall, level and mark the four
1.
screw hole locations and drill holes.
If the template is not available, use the dimensions in
2.
Mounting Tabs (4)
Power Supply Location
Figure 2-4 on page
Accessories
Mounting Holes
Cable Routing Holes
Thumb Screw Holes (2)
2-6.
2 - 5