Bluetooth Configuration Setting - Motorola MC9500-K Integrator Manual

B - 2 MC9500-K Mobile Computer Integrator Guide
Warm boot the MC9500-K to have the registry setting take effect.
Tap Start > Settings > Power > BatteryMgmt tab.
1.
BatteryMgmt Tab with Threshold Change Checkbox
Figure B-2
In the Battery Usage Threshold text box, enter a new value.
2.
Select the Check to change the Battery Age Threshold to read only field checkbox.
3.
Tap Apply.
4.
Tap ok. The new value is set and then the registry key is deleted.
5.

Bluetooth Configuration Setting

The MC9500-K supports both the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack. Only one
Bluetooth stack can be used at a time. By default, the Microsoft Bluetooth stack is enabled. A registry key on the
MC9500-K can be modified to disable the Microsoft stack and enable the StoneStreet One stack.
Using a registry editor, navigate to the following:
[HKEY_LOCAL_MACHINE\Software\SymbolBluetooth
Edit the following key:
"SSStack"=dword:1
where:
0 = enable Microsoft stack and disable StoneStreet One stack (default)
1 = enable StoneStreet One stack and disable Microsoft stack
After setting the registry key, warm boot the MC9500-K.