Motorola MC9500-K Integrator Manual page 59

Single Bay USB Cradle with Clip
Figure 2-34
Align the Single Bay USB Cradle with the clip.
2.
Snap the Single Bay USB Cradle onto the clip.
3.
Single Bay USB Cradle and Battery Charger
Figure 2-35
Use the DC "Y" Cable to power both cradles.
Connect the power supply DC line cord to the female jack of the DC "Y" cable.
1.
Connect one power plug of the DC "Y" cable to the power port on the Single Bay USB cradle and the other
2.
power plug to the power port of the Single Slot Battery Charger.
Clip
Accessories 2 - 25