1 - 14 MC9500-K Mobile Computer Integrator Guide
Turn Pin and Loop
Figure 1-17
Remove the loop end of the handstrap and pin from the housing slot.
8.
To replace a new handstrap:
Pinch the loop end of the new handstrap and insert the loop into the housing slot. Ensure that the loop is
1.
completely inserted into the housing slot.
Insert Strap and Pin into Slot
Figure 1-18
In the battery compartment area, insert the pin into the loop of the handstrap.
2.
Insert Pin into Loop
Figure 1-19
Ensure that the pin is centered in the loop.
3.