Centralized Day/Night Switching For Main Office Assignment - NEC Electra Elite IPK Programing Manual

Electra Elite IPK
___________________________________________________________________________________
Related Programming (Continued)
M.B. Number Memory Block Name
1-15-07 K-CCIS Message Response Timeout Assignment
1-15-08 Link Reconnect Allow/Deny Selection
1-15-09 K-CCIS Maximum Call Forwarding Hop Assignment
1-15-10 Calling Name Display Allow/Deny Selection
1-15-11 Centralized Billing Allow/Deny Selection
1-15-12 Centralized Billing – Point Code of Center Office Assignment
1-15-14

Centralized Day/Night Switching for Main Office Assignment

3-70 CIC Number Assignment
5-05
Common Signaling Channel Route Selection
1-1-05
Start Time Selection
1-5-02
SMDR Print Format
1-5-13
Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
1. Memory Block 1-15-00 (K-CCIS Main/Remote Office Selection) is used for the Centralized Day/Night Switching
feature.
2. This Memory Block is used for the Remote Office only.
___________________________________________________________________________________
Programming Manual
Notes
Document Revision 1
2 - 329