Tie Line First Ring Pattern Selection - NEC Electra Elite IPK Programing Manual

Document Revison 1
___________________________________________________________________________________
1-1-34

Tie Line First Ring Pattern Selection

General Description
Use this Memory Block to set a specific ringing pattern for incoming calls on Tie lines.
After a delay interval specified in Memory Block 1-1-07 (Tie Line Delay Ringing Time
Selection), a Tie call can ring at all Day/Night ring-assigned telephones using a
different cadence.
Display
D a t a
N o .
3 4 : T L I
T I M E
Settings
LK 1 LK 2
PAT1 PAT2
Programming Procedures
1 Go off-line.
C D
2 Press LK1 + LK1 +
G
3 Press the corresponding CO/PBX line key to change the data option.
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
Tie Line Delay Ringing Time Selection
1-1-07
Tie Line Delay Ring Pattern Selection
1-1-53
CO/PBX Ring Assignment (Day Mode)
4-01
4-02 CO/PBX Ring Assignment (Night Mode)
1. Specify one pattern in the Ringing Pattern Selection Table.
2. When Voice is selected, switching from voice to tone is not allowed, Memory Block 1-1-07 (Tie Line Delay
Ringing Time Selection) is not used, and Handsfree Answerback is not allowed at the receiving station.
___________________________________________________________________________________
2 - 42
S e t t i n g
D a t a
T i t l e
R N G P A T 3
D I S P L A Y
LK 3 LK 4 LK 5
PAT3 PAT4 ICM
t o access the Memory Block.
E
to go back on-line.
LK 6 LK 7
VOICE
Notes
System Mode
1
Submode
1
Data No.
34
PC Programming
+ALN
LK 8 The shaded
selection is the
default.
Memory Blocks
Elite IPK