Call Forward - No Answer Time Selection - NEC Electra Elite IPK Programing Manual

Electra Elite IPK
___________________________________________________________________________________
1-2-22 Call Forward - No Answer Time
Selection
General Description
Use this Memory Block to specify the time before incoming intercom calls or incoming
CO/PBX lines are forwarded to another station number when the called party does not
answer.
Display
D a t a
N o .
2 2 : F W D
T I M E
Settings
LK 1 LK 2
4s 8s
Programming Procedures
1 Go off-line.
B B
2 Press LK1 + LK2 +
G
3 Press the corresponding CO/PBX line key to change the data option.
4 Press to write the data and display the next Memory Block.
5 Program the next Memory Block or press
Related Programming
M.B. Number Memory Block Name
1-1-46 Access Code (1-Digit) Assignment
1-1-47 Access Code (2-Digit) Assignment
1-1-48 Access Code (3-Digit) Assignment
1-2-01 Intercom Call Voice/Tone Signal Selection
1-8-08 Class of Service (Station) Feature Selection 2
4-17 Station to Class of Service Feature Assignment
4-42 Call Forward-Busy Immediately/Delay Selection
___________________________________________________________________________________
Programming Manual
S e t t i n g
T i t l e
D a t a
N O A N S 8 s
D I S P L A Y
LK 3 LK 4 LK 5
12s 18s 24s
to access the Memory Block.
E
to go back on-line.
LK 6 LK 7 LK 8
30s 60s
Document Revision 1
System Mode
1
Submode
2
Data No.
22
PC Programming
+BM
The shaded
selection is the
default.
2 - 109