Deleting A Mark Or Waypoint; Moving A Mark Or Waypoint - Standard Horizon CPF390i Owner's Manual

Gps chart plotters / fish finder
Hide thumbs Also See for CPF390i:
Table of Contents

Advertisement

2. The Mark Icon is selected, press [ENT]. A popup window appears:
3. Move the ShuttlePoint knob to select the desired Mark Icon, when finished press [ENT].
4. Move the ShuttlePoint knob to the right to select the Mark Name. Press [ENT] and the
first digit in the name will be highlighted.
5. Move the ShuttlePoint knob up or down to select the first character.
6. Move the ShuttlePoint knob to the right to select the next character.
7. Repeat steps 4 and 5 until the Mark name is shown. Press [ENT].
8. Move the ShuttlePoint knob to the right to select the Lat/Lon and press [ENT].
9. Move the ShuttlePoint knob up or down to select the first character.
10. Move the ShuttlePoint knob to the right to select the next character.
11. Repeat steps 9 and 10 until the desired position is shown. Press [ENT] and [CLR] to
store the Mark.
7.1.0

Deleting a Mark or Waypoint

1. Move the ShuttlePoint knob over the Mark or Waypoint to delete.
2. Press [D
]. A popup window will be shown to confirm deleting the point.
ELETE
3. Move the ShuttlePoint knob to highlight YES and press [ENT].
7.1.1

Moving a Mark or Waypoint

1. Move the ShuttlePoint knob over the Mark or Waypoint you want to move.
2. Press [M
].
OVE
3. Use the ShuttlePoint knob to move the cursor. A dotted line, connecting the previous
Waypoint position to the new position, is shown:
Page 70
Figure 7.1 - Mark editing
Figure 7.1a - Mark Icons
CP390i and CPF390i

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp390i

Table of Contents