Table of Contents
Advertisement
3. Move the ShuttlePoint knob to select the desired display and press [ENT]. The Page
options are shown in the following paragraphs.
17.2.0 Auto Full Page
When this page is selected, the Fish Finder automatically changes the transmit frequency
to show depths. Automatic switching occurs when depth of water is less than 400FT
(200kHz) and greater than 400FT (50kHz).
17.2.1 200 kHz Full, 50 kHz Full and 50&200kHz Display Pages
Allows the user to setup the GPS Chart Plotter display to show 200kHz, 50kHz or 200/50
kHz split screen Fish Finder.
200kHz
50kHz
50/200kHz
Figure 17.2.1 - Full Display pages
17.2.2 200 kHz and 50 kHz Zoom Pages
Allows the user to zoom into the 200kHz or 50kHz Fish Finder display to show detail of the
area selected by the VRM (Variable Range Marker). Referring to Figure 17.2.2, the left
display shows the zoomed display and the right display shown the unzoomed display.
To select the area to be zoomed in move the ShuttlePoint knob Up or Down which moves
the VRM line.
To zoom In or Out, press [ZOOM IN] or [ZOOM OUT].
The zoom ranges are 2x and 4x the normal Fish Finder display.
Figure 17.2.2 - Zoom Full page
CP390i and CPF390i
Page 133
Advertisement
Table of Contents
