Information - Standard Horizon CPF390i Owner's Manual

4. Move the ShuttlePoint knob up/down to change each number or letter and left/right to
move to the next or previous position in the Coordinates.
5. Once the Coordinates are entered, press [ENT] to show the location the Mark on the
Chart page.
6. Press [CLR] at any time to return your cursor to your vessel's position.

4.0.10 Information

This feature allows you to obtain information on any position on the Chart page.
1. Press [FIND].
2. Move the ShuttlePoint knob to highlight INFORMATION and press [ENT] or move the
ShuttlePoint knob to the right.
3. A page will be shown with objects information. The upper side of the page contains the
Info Tree and the lower side contains the expanded information. While moving the
ShuttlePoint knob through the Info Tree, all the relevant information of the selected
object is shown on the lower part of the page.
4. Press [CLR] again at any time to return your cursor to your vessel's position.
CP390i and CPF390i
Figure 4.0.9 - Find GPS Coordinates
Figure 4.0.10 - Find Information
WAAS 3D
Page 53