Programming The Rf Transmitters (5800 Rf Systems) - First Alert FA142C Installation Instructions Manual

Model
5819
5827
5827BD
5850
(GBD)
5890
5899

Programming the RF Transmitters (5800 RF Systems)

Compatible 5800 Series Transmitters (Continued)
Product
Shock Processor
Transmitter
Wireless Keypad
Wireless Two-Way
Keypad
(used with 5800TM)
Glass Break Detector
PIR Detector
Magnets
1. With at least one 2-line Alpha keypad connected to the keypad terminals,
power up the system temporarily. If you had previously connected the AC
transformer to the control panel, you need only plug the transformer in (to
120VAC outlet) to power up the system.
2. Enter the programming mode by keying: Installer Code + 8 + 0 .
Data field 22: RF SYSTEM TYPE, must have been programmed for a 5800
RF system before continuing ("2" entered in that field).
Enter As Input
Device Type Description
RF • Connects to externally mounted
inertia-type shock detector (not
supplied).
• Has built-in tampered cover switch.
• Has 3 unique input (loop) codes:
Loop 1: Terminals for a wired, N.C.
sensor loop.
Loop 2: For a closed circuit contact
loop using the built-in reed switch in
conjunction with a magnet.
Loop 3: Terminals for a wired,
closed circuit contact loop.
House ID • Can be used to turn the burglary
protection on and off.
• Features the same built-in panic
functions as wired keypads.
• The keypad is identified as zone
"00" on wired keypads when it
transmits with a low battery.
House ID • Operates the system similarly to
wired keypads.
• Can indicate system status via its 3
LEDs and sounder.
• Includes 3 panic keys.
• House ID must be set.
• Requires 5800TM Transmitter
Module.
RF • Requires both sound and shock of
breaking glass to cause alarm to be
transmitted.
RF • Dual element passive infrared
detector/transmitter with selectable
pulse count.
Note : There is a 3-minute lock-out
between fault transmissions to
conserve battery life.
Package of 4 magnets for use with
5816 and 5817 transmitters.
– 38 –