First Alert FA142C Installation Instructions Manual page 87

FA550KP
REMOTE KEYPAD
4281L, 4281M, 4281H
RF RECEIVERS
(5700 System)
and
5881L, 5881M, 5881H
RF RECEIVERS
(5800 System)
5800TM
TRANSMITTER
MODULE
used with 5827BD
Wireless 2-Way Keypad
4204
RELAY MODULE
4219
WIRED EXPANSION
MODULE
4229
WIRED EXPANSION/
RELAY MODULE
FA4285
PHONE MODULE
7720PLUS/7820
LONG RANGE RADIO
1. Physical: 5-1/16" W x 6-3/8" H x 1-3/4" D (129mm x 162mm x 45mm).
2. Electrical: Voltage Input: 12VDC; Current Drain: 140mA.
3. Interface Wiring: Same as FA210KP.
1. Physical: 7-3/8" (188mm) W x 4-3/8" (112mm) H x 1-7/16" (37mm) D.
2. Electrical: Voltage Input: 12VDC; Current Drain: 35mA.
3. Interface Wiring: Same as 4127.
4. Range: 200ft (60m) nominal indoors from wireless transmitters (the
actual range to be determined with system in TEST mode).
5. Zones: (With the FA142C)
4281L: accepts up to 4 transmitters.
4281M or 4281H: accepts up to 8 transmitters.
5881L/5882L*: accepts up to 8 transmitters.
5881M: accepts up to 16 transmitters.
5881H/5882H: accepts up to 30 transmitters.
1. Physical: 2-1/4" W x 4-1/8" H x 7/8" D (57mm x 105mm x 22mm).
2. Electrical: Voltage Input: 12VDC; Current Drain: 20mA.
3. Interface Wiring: Same as FA210KP.
1. Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).
2. Electrical: Voltage Input: 12VDC; Current Drain: 15mA (Relays off).
3. Interface Wiring: Same as FA210KP.
4. Four Output Relays:
1. Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D
2. Electrical: Voltage Input: 12VDC; Current Drain: 35mA
3. Interface Wiring: Same as FA210KP.
4. Four Output Relays:
1. Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D
2. Electrical: Voltage Input: 12VDC; Current Drain: 35mA (Relays off)
3. Interface Wiring: Same as FA210KP.
4. 8 EOLR Loops (A–H):
5. Two Output Relays:
1. Physical: 6-1/2" W x 4-1/4" H x 1-1/4" D (169mm x 108mm x 32mm).
2. Electrical: Voltage Input: 12VDC; Current Drain: 160mA.
3. Device Address: Permanently set to address 4.
4. Interface Wiring: See FA4285 PHONE MODULE section.
5. Telephone Line Connections: See FA4285 PHONE MODULE section.
1. Physical: 8-1/2" W x 9-1/2" H x 1-3/4" D (216mm x 242mm x 45mm).
2. Electrical: Voltage Input: 12VDC; Current Drain: 150mA.
3. Device Address: Set to address 3.
4. Interface Wiring: Same as FA210KP.
– 87 –
Note: 10-7/8" (277mm) H with antenna.
SPDT Contacts.
Rating: 2A max at 28VDC/AC.
(169mm x 108mm x 32mm)
SPDT Contacts, Rating: 2A max at 28VDC/AC
(169mm x 108mm x 32mm)
Loop A can be set for fast (10–15msec) response
to an open.
SPDT Contacts; Rating: 2A max at 28VDC/AC
180mA (Relays on).
100mA (Relays on)