Memory Backup Setting; Sw42 Initial Setting Button - Fujitsu Airstage V series Service Manual

SW2-6 2-7 setting forbidden.
SW 2-6
SW 2-7

Memory backup setting

When installing the central remote controller, this switch must be set to ON.
(factory setting : OFF)
(
SW2-8
Memory backup setting
OFF
ON
At the time of shipment, the battery is turned off to avoid electricity consumption.
Be sure to set this switch to ON.

SW42 Initial setting button

This switch is used when initializing the central remote controller.
OFF
OFF
Factory setting)
OFF
ON
02-29