Table of Contents
Advertisement
1-7
4. Set up data for reference
Main jet (MJ)
Jet needle (JN)
Slow jet (SJ)
Air screw (AS)
•
How to set up
i)
Temperature, humidity and places are the factors to alter how to set up. Start setting up by
fitting main jets with bigger numbers to the carburettors.
ii)
Adjust or change jets and other parts according to the performance.
How to select parts: Check ⇒ MJ number / JN grade / AS reverse degree adjustment ⇒
iii)
check ⇒ OK
•
Select main jets: by straights ⇒ check ⇒ adjust sizes ⇒ check ⇒ OK
•
Select jet needles (straights): getting starts at a corner
•
Select jet needles (grades): from a corner to a straight
•
Select slow jets ⇒ ?????? against the throttle
•
Select air screws ⇒ from ?????? to a corner.
[CAUTION]
•
Exchange the air filter/air box of the standard machine for the kit.
•
The way of setting up varies according to the brand of petrol/oils and so on.
•
It is possible that the tip of a jet needle does not fit the carburettor, touching the body of the
carburettor when exchanging jet needles. Set them properly with your fingers attached.
Rear bank #1
#195
J8YB 2.765-3.0 grade
J8YB 2.765-4.0 grade
#42
1
Front bank #2
#192
#42
1
Hide quick links:
Advertisement
Chapters
Table of Contents
