(Iii) Driving - Honda 1994 NSR 250 SP Setup Manual

1-4
3. Driving
i) Slowly raise engine speed, starting with low.
ii) Idle engine speed within 6,000 rpm until the temperature indicator registers 50°C.
iii) Warm up the engine, idling within 10,000 rpm until the temperature indicator registers over
50°C.
iv) Check for oil and water leakage.
v) Finish when the indicator registers 70°C (depending on temperature and conditions outside).
[CAUTION]
•
Avoid high engine speed idling when in neutral
4. Points to check when running.
i) Is the indication on the temperature indicators and the tachometer appropriate?
ii) Do all the controls work smoothly?
iii) Do brakes work properly?
5. Points to check after running
i) How hot has the plug been heated?
ii) Is there any oil or water leaking?
iii) Is there any screw or bolt loose or missing?
iv) How long has the chain been stretched?
v) How much oil is left in the fuel tank?
vi) Is there anything wrong with brakes?
[CAUTION]
•
These items above are the main points to check. It is, therefore, advisable to check other parts
for yourself.