Debug Commands - KVH Industries TracVision S3 Owner's Manual

A Guide to TracVision S3

Debug Commands

E-8
Configure Longitude of a User-configurable Satellite
Function:
Command:
Response:
Where:
E.7
Table E-7
Report Offset Angles
Function:
Command:
Response:
Where:
Applies Default Values to Default Satellites
Function:
Command:
Response:
Where:
Report Last Satellite Tracked/Update Value
Function:
Command:
Response:
Where:
configures one of the user-configurable satellites
with the longitude provided
SATCONFIG,USERX,YYY,Z,D,L
if valid pair, echoes the input data
if invalid pair, returns error message
X = 1 or 2
YYY = longitude (0-180)
Z = E (East) or W (West)
D = decoding type (0 = test, 1 = DSS-A,
2 = DSS-B, 3 = DVB)
L = LNB polarization (c = circular, l = linear)

Debug Commands

reports system offset angles
OFFSETS
OFFSETS,XXXXX,YYYY
Offsets = XXXXX.X XXXXX.X
X = new azimuth offset (-1800 - 1800)
Y = new elevation angle (-450 - 450)
updates the default satellites to the default values
SATPAIR,X
displays numerous frequency commands and
reports "Satellite Installation Complete"
X = 0 (satellites default to Astra & Hotbird)
or
X = 1 (satellites default to ExpressVu and
EchoStar 119)
or
X = 2 (DSS 101 and DSS 119)
reports the last satellite tracked or updates the last
tracked satellite to the value input if it is different
from the current value
LASTSAT
LASTSAT,X
Last = <sat_name>
X = A (updates to satellite A)
or
X = B (updates to satellite B)