Table of Contents
Advertisement
Rotating Plate Shipping
Restraint Storage
TracVision S3 Shipping Restraints
(Storage Position)
6
Figure 2-9
Figure 2-10
14. Drill the cable access hole (marked in
15. Proceed to Section 2.3, "Wiring the TracVision S3
Rotating Plate Shipping Restraint (1 of 2)
Installation Bolt and Washer
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
vehicle's roof.
System," to wire the TracVision S3 system. The
radome will be placed back on the baseplate using
the hardware removed in Step 9 after wiring and
initializing the system.
Forward
Shipping Restraint
Step
4) in the
Advertisement
Table of Contents
Troubleshooting
