Configuring Tracvision S3 For Remote Satellite Dish Operation - KVH Industries TracVision S3 Owner's Manual

A Guide to TracVision S3
Remote Dish Wiring Configuration
2-26
2.7
In some campground locations, dense foliage will block the
satellite signal. In these situations, a remote portable antenna
may be the only solution to satellite signal reception.
The wiring option for the remote dish is very simple and should
be installed when the TracVision S3 is installed. A high-quality
"A/B switch" should be used to change from TracVision S3
dish reception to remote antenna operation. The recommended
wiring arrangement for remote dish operation is illustrated in
Figure 2-27.
Figure 2-27
RF Cable
Configuring TracVision S3 for
Remote Satellite Dish Operation
TV Out
IRD
SAT in
RF Cable
Common
A B
A/B Switch
A B
Antenna
RF Cable
Remote Dish