Basic Touchscreen Operations; Multi-Touch Gestures - Raymarine a Series Installation And Operation Instructions Manual

6.11 Basic touchscreen operations

Placing and moving the cursor using
touch
To place or move the cursor around the screen on a touchscreen
multifunction display follow the steps below.
1. Touch the screen at any position on the screen to place the
cursor there.
Touchscreen lock
On a multifunction display with HybridTouch you can lock the
touchscreen to prevent accidental use.
For example, locking the touchscreen is particularly useful in
rough water or weather conditions.
The touchscreen can be locked and unlocked from the
homescreen. The touchscreen can only be unlocked using
physical buttons.
Locking the touchscreen – New e Series
On new e Series multifunction displays the Homescreen contains
a dedicated Touch Lock icon.
With the homescreen displayed:
1. Select the Touch Lock icon.
It changes color to indicate that the touchscreen is disabled.
All functions are still available using the physical buttons.
Locking the touchscreen - touch only
displays
When a touch only display is paired with an optional remote
keypad the touchscreen can be locked.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that On is highlighted.
The touchscreen is now locked.
Unlocking the touchscreen – New e Series
You can unlock the touchscreen by following the steps below.
With the homescreen displayed:
1. Use the UniControl to highlight the Touch Lock icon.
2. Press the OK button.
The Touchscreen is enabled.
Unlocking the touchscreen - touch only
displays
To unlock the touchscreen of a touch only display when paired
with a remote keypad follow the steps below.
From the Homescreen:
1. Select the Set-up icon.
2. Select Touch-Lock so that Off is highlighted.
The touchscreen is now unlocked.
Getting started
Touchscreen is locked. All functions
remain available using physical buttons.
Touchscreen is unlocked.

6.12 Multi-Touch gestures

Raymarine a Series and gS Series multifunction displays support
multi-touch.
Multi-touch means that the display is capable of recognizing
multiple simultaneous touch inputs. This means that you can
use 2 or more fingers on the screen at the same time to perform

multi-touch gestures.

Pinch to Zoom
The pinch to zoom gestures can be performed on multifunction
displays that support multi-touch.
Pinch to zoom consists of 2 actions:
• Move 2 fingers apart to zoom in.
• Move 2 fingers together to zoom out.
Pinch to Zoom can be used in the following applications:
• Chart application.
• Weather application.
D12920-2
81