Display Preferences - Raymarine a Series Installation And Operation Instructions Manual

27.5 Display preferences

You can specify your preference for general display behavior.
Menu item
Starting page
Key Beep
Cursor Autohide
Range Controls
Context Menu
Pilot Control Bar
Shared Brightness
Screenshot File
Onscreen range controls
You can enable and disable onscreen range controls on New e
Series and gS Series displays by following the steps below.
From the homescreen:
1. Select Customize.
2. Select Display Preferences.
310
Description
Allows you to select what page the display opens at start up.
An audible sound can be made each time a button is pressed
or the touchscreen is used.
If set to On, the cursor will be automatically hidden after a
period of no movement. If set to Off, the cursor will persist
on the screen until moved.
On New e Series and gS Series displays you can specify
whether the Chart, Radar and Weather application display
the onscreen range in and range out icons.
Note:
• Onscreen range controls are not available on
non-touchscreen displays.
• Onscreen range controls cannot be hidden on touch
only displays.
(Touchscreen displays only) Determines how the context
menu is accessed using touch
Allows you to enable and disable the pilot bar on each display
individually, when connected to an SPX or SeaTalk autopilot.
Note: For evolution autopilots the Pilot Bar option is in
the Pilot Set-up page.
You can set up shared brightness groups (or "zones") to
adjust the brightness on multiple units simultaneously.
Enables you to specify the default memory card slot for
screen capture images.
Note: This option is only available on displays with
multiple card reader slots.
Options
• Homescreen (default)
• Last page — After power up the last used page
is displayed.
• Choose page — After power up the page
selected is displayed.
• ON (default)
• OFF
• ON
• OFF (default)
• Show (default)
• Hide
• Touch (default) — touching a chart object opens
the context menu.
• Hold — Touch and holding on a chart object
opens the context menu.
• Shown
• Hidden
Share Brightness
• ON (default)
• OFF
Brightness Group
• Helm 1 (default)
• Helm 2
• Cockpit
• Flybridge
• Mast
• Group 1
• Group 2
• Group 3
• Group 4
• Group 5
• MicroSD 1
• MicroSD 2
3. Select Range Controls.
Selecting Range Controls will switch between showing and
hiding the onscreen range controls.
a Series / c Series / e Series