Adjusting Volume Levels For Each Zone; Selecting The Zone To Control - Raymarine a Series Installation And Operation Instructions Manual

23.5 Adjusting volume levels for each
zone
The volume level for each zone can be adjusted individually or
you can adjust all zones at the same time.
From the Fusion link application:
1. Select Vol:.
The zone volume control is displayed.
2. Select the relevant zone.
3. Adjust the volume level to the required setting.
4. Select the Back icon to go back to the main screen.
Note: Adjusting the All Zones level will adjust all of the zones
at the same time.
284

23.6 Selecting the zone to control

You can select which zone the main screen will control.
From the Fusion link application:
1. Select Zone:.
The zone selection bar is displayed.
2. Select the zone you want to control.
3. The volume controls on the main screen will now control the
volume level of the selected zone.
a Series / c Series / e Series