Saving User Data And User Settings - Raymarine a Series Installation And Operation Instructions Manual

6. Use your fingers to pull the card clear of the card slot, using
the edge of the card.
7. To prevent the ingress of water and consequent damage,
close the chart card door.
Note: You can also power off the multifunction display and
follow steps 4 to 7 above.
98

8.4 Saving user data and user settings

You can save your waypoints, routes, tracks and user settings
to a memory card. Waypoints, routes and tracks are saved as
gpx data files. The gpx file format is a device-independent data
format making it easy to exchange data between your display
and other GPS devices / software that support the gpx file format.
Type of data
Waypoints (user data)
Routes (user data)
Tracks (user data)
User settings
Note: It is recommended that you save your user data and
user settings to a memory card on a regular basis.
Note: Do NOT save user data or settings to a chart card
containing cartography.
Saving all user data to a memory card
D12291-1
You can save all user data to one archive file.
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart card) inserted
into a card slot.
2. Select My Data.
3. Select Import/Export.
4. Select Save Data to Card.
5. Select Save All.
The on-screen keyboard is displayed.
6. Using the on-screen keyboard enter the filename you want to
save the file as.
7. Select SAVE.
If your display has more than 1 card slot then a message is
displayed prompting you to select the slot you want to save
data to, if your display only has 1 card slot then you will not
be prompted.
8. Select SD1 for a memory card in the top card slot, or SD2 for
a memory card in the bottom card slot.
A confirmation dialog is displayed.
9. Select OK.
Saving waypoints to a memory card
With the Homescreen displayed:
1. Ensure you have a memory card (NOT a chart card) inserted
into a card slot.
2. Select My Data.
3. Select Import/Export.
4. Select Save Data to Card.
5. Select Save Waypoints to Card.
The Waypoint Group list is displayed.
Description Notes
Each waypoint
group can be saved
separately
Each route can be
saved separately
Each track can be
saved separately
Saves the settings Only 1 user settings
you've made in the archive file can be
set-up menus to a saved per memory
single archive file. card.
a Series / c Series / e Series