Screenshots; Resetting Your System - Raymarine a Series Installation And Operation Instructions Manual

8.5 Screenshots

You can take a screenshot of what is currently displayed on the
screen.
Screenshots are saved to a MicroSD card in .bmp (bitmap)
format. The saved image can be viewed from any device
capable of viewing bitmap images.
Taking a screenshot
You can take a screenshot by following the steps below.
1. Insert a MicroSD card with suitable free space available into
the card reader.
2. Press the Power button.
The Shortcuts page is displayed:
3. Select the Camera icon.
A confirmation message is displayed.
4. Select Ok.
The screenshot is now saved to the MicroSD card.
Tip If your multifunction display has a Back button you can also
take a screenshot by pressing and holding the Back button until
the confirmation message appears.
Selecting the SD card slot for screenshots
If your multifunction display has 2 card reader slots, you must
select which card slot to save the screenshot to.
From the homescreen.
1. Select Customize.
2. Select Display Preferences.
3. Select Screenshot File:.
4. Select either MicroSD 1 or MicroSD 2.
Viewing a screenshot on the multifunction
display
You can view images on the multifunction display.
1. Insert a MicroSD card containing the screenshot or image
into the MicroSD card slot of your multifunction display.
2. From the homescreen, select My Data.
3. Select Images and Video.
The file browser dialog is displayed.
4. Use the file browser to locate the file on the MicroSD card.
5. Select the file you want to view.
The file will now open.
6. Select Back or Close to close the image.
102

8.6 Resetting your system

Your system may be reset to its factory default settings if
required.
There are 2 types of reset operation, both of which affect the
current display you are using, AND any networked displays.
• Settings reset.
• Settings and data reset.
Settings reset
This option resets your setup menus, page sets, and databar
settings to factory default. It will NOT affect your waypoints,
routes, or tracks data.
Settings and data reset
In addition to the settings reset detailed above, performing a
settings and data reset will also remove ALL waypoints, routes,
and tracks data.
Resetting system settings
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings reset, or No to cancel.
Resetting system settings and data
Note: Performing a settings and data reset erases ALL
waypoints, routes, and track data from your system. BEFORE
proceeding with a settings and data reset, ensure that you
backup any data that you want to keep on to a memory card.
With the homescreen displayed:
1. Select Set-up.
2. Select Maintenance.
3. Select System Settings and Data Reset.
A message is displayed prompting you to confirm the action.
4. Select Yes to proceed with the settings and data reset, or
No to cancel.
a Series / c Series / e Series