Fishfinder Scrolling - Raymarine a Series Installation And Operation Instructions Manual

Range shift
The Range Shift function enables a specific area of the water
column to be displayed on-screen.
In the below example the top 20 feet of the water column is not
displayed
Using range shift
The default setting adjusts the display to keep the bottom in the
lower half of the screen. Alternatively you can shift the image
within the current range.
From the application menu, with Range set to Manual:
1. Select Range.
2. Select Range Shift.
The range shift dialog is displayed.
3. Adjust the setting to the required value.
You will see the range changing on the screen as you adjust
the setting.
4. Select Back or press the Ok button to confirm the setting and
close the range shift dialog.
Fishfinder application

17.9 Fishfinder scrolling

The fishfinder image scrolls from right to left. You can pause the
scrolling or adjust the scroll speed, to ease placing of waypoints
or VRMs onscreen.
Scroll speed
You can adjust the speed at which the fishfinder image scrolls. A
faster speed provides more detail which may be useful when you
are looking for fish. If you select a slower speed the information
remains on the display for longer.
Scroll pause
You can pause the display to see a 'snapshot' of the fishfinder
image. When the image is paused scrolling stops but the depth
indication continues to be updated.
Adjusting the scroll speed
The default scroll speed is 100%, the scroll speed can be
adjusted following the steps below.
From the Fishfinder application menu:
1. Select Presentation.
2. Select Scroll Speed.
The Scroll speed numeric adjust control is displayed.
3. Adjust the scroll speed to the required setting.
Adjustment increments are as follows:
• 10% increments for values between 10% and 100%
• 100% increments for values between 100% and 500%
4. Select Back or Ok to confirm and close the numeric adjust
control.
Pausing the screen
The Fishfinder application can be paused.
From the Fishfinder application:
1. Select Menu.
2. Select Scrolling so that Pause is highlighted.
Selecting Scrolling again will resume the scrolling.
193