Locking And Unlocking With Keyless Access Entry Function - Subaru Legacy 2015 Owner's Manual

key of another vehicle
When carrying more than one
access key
When the access key is placed
near wireless communication
equipment such as a cell phone
When the access key is placed
near a metallic object
When metallic accessories are
attached to the access key
When carrying the access key
with electronic appliances such as
a laptop computer
When the battery of the access
key is discharged
. The access key is always commu-
nicating with the vehicle and is con-
tinuously using the battery. Although
the life of the battery varies depending
on the operating conditions, it is ap-
proximately 1 to 2 years. If the battery
becomes fully discharged, replace it
with a new one.
. If an access key is lost, it is
recommended that the access key be
reregistered. For reregistration of an
access key, contact a SUBARU dealer.
. For a spare access key, contact a
SUBARU dealer.
. Up to 7 access keys can be regis-
tered for one vehicle.
. Carefully store the key number plate
Keys and doors/Keyless access with push button start system
supplied with the access key. It is
necessary for vehicle repair.
. Do not leave the access key in the
storage spaces inside the vehicle, such
as the door pocket, dashboard and the
corner of the cargo area. Vibrations
may damage the key or turn on the
switch, possibly resulting in a lockout.
. After the vehicle battery is dis-
charged or replaced, initialization of
the steering lock system may be re-
quired to start the engine. In this case,
perform the following procedure to
initialize the steering lock.
(1) Turn the push-button ignition
switch to the OFF position. For
details, refer to Switching power
3-6.
(2) Open and close the driver s
door.
(3) Wait for approximately 10 sec-
onds.
When the steering is locked, the initi-
alization is completed.
Locking and unlocking with
keyless access entry func-
tion
Operating ranges
Legacy
1) Antenna
2) Operating range
CONTINUED
2-13