Cargo Area Cover (Outback If Equipped); Using The Cover; To Install The Front Cover - Subaru Legacy 2015 Owner's Manual

. Do not use more than one floor
mat.
Retaining pins are located on the driver s
side floor.
The floor mat should be properly secured
using the built-in grommets, by placing the
grommets over the pins and pushing them
downward.
Interior equipment/Cargo area cover (Outback
Cargo area cover
(Outback if equipped)
The cargo area cover is provided for
covering the cargo area and to protect its
contents from direct sunlight. This cover is
detachable to make room for additional
cargo.

Using the cover

To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To
rewind it, unhook it from the catches and
it will rewind automatically. You should
hold on to the cover and guide it back into
the cover housing while it is rewinding.
if equipped)
WARNING
Do not place anything on the ex-
tended cover. Putting excessive
weight on the extended cover can
break it and an object on the cover
could tumble forward in the event of
a sudden stop or collision. This
could cause serious injury.
CAUTION
. Be careful not to scratch the rear
gate stays while extending and
rewinding the cover. Scratches
on the stays could cause leakage
of gas from the stays, which may
result in their inability to hold the
rear gate open.
. When reclining the rear seatback,
move the front cover backward
so that the cover is not damaged.

To install the front cover

CAUTION
When reclining the rear seatback,
move the front cover backward so
that the cover is not damaged.
CONTINUED
6-15