System malfunction indicator
System malfunction indicator
1)
At first, this message will appear
2)
Then this message will appear
This indicator appears when a malfunction
occurs in the system. Contact a SUBARU
dealer and have the system inspected.
Starting and operating/Subaru Rear Vehicle Detection (SRVD)
SRVD OFF switch
SRVD OFF switch
SRVD OFF indicator
If the SRVD OFF switch is pressed, the
SRVD OFF indicator appears on the multi
information display of the combination
meter, and the SRVD is deactivated.
Press the switch again to activate the
SRVD. The SRVD OFF indicator disap-
pears.
NOTE
. In the following cases, press the
SRVD OFF switch to deactivate the
system. The system may not operate
properly due to blocked radar waves.
When towing a trailer
When a bicycle carrier or other
item is fitted to the rear of the
vehicle
When using a chassis dynam-
ometer or free roller device, etc.
When running the engine and
making the wheels rotate while
lifting up the vehicle
. If the ignition switch is turned to the
LOCK / OFF position, the last known
status of the system is maintained. For
example, if the ignition switch is turned
to the LOCK / OFF position with the
SRVD deactivated, the SRVD remains
deactivated the next time the ignition
switch is turned to the ON position.
. If the vehicle battery is disconnected
due to situations such as battery
terminal or fuse replacement, after the
battery is reconnected, the SRVD will
be activated.
CONTINUED
7-57