Subaru Legacy 2015 Owner's Manual page 259

5-30
Audio/Radio operation
No. Function
Select to display the audio source
1
selection screen.
Select to change the FM band.
2
HD Radio indicator.
The indicator on the top right of the
3
screen changes according to the
reception condition of HD Radio.
Select to display a station list.
4
Select to scan radio channels.
This function enables searching for
receivable stations automatically,
and tunes in to a frequency for 5
seconds if a station is found. When
5
the 5-second period has elapsed, the
system searches for the next recei-
vable station again, and tunes in to
the frequency for 5 seconds.
Option key. Select to open the
6
Option screen.
If you press a key for less than 1.5
seconds, the system tunes to the
stored frequency.
If you press a key for more than 1.5
7
seconds, the system stores the
frequency to the selected preset
channel. Refer to Presetting a sta-
tion 5-32.
Select to display the sound setting
screen. Refer to Basic operation
8
5-9.
Turn to adjust volume.
Press to turn the audio system on/
9
off.
No. Function
Turn to step up/down frequencies.
Turn to move up/down the list. Also,
the knob can be used to enter
10
selections on the list screens by
pressing.
Press to select an audio mode.
Select to seek for a station/channel.
11
Select and hold for continuous seek.
NOTE
. The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
. The radio automatically blends to an
HD Radio signal in AM or FM where
available.
. Digital, CD-quality sound. HD Radio
Technology enables local radio stations to
broadcast a clean digital signal. AM
sounds like today s FM and FM sounds
like a CD.
HD caution list
The following caution messages appear.