Subaru Legacy 2015 Owner's Manual page 36

2. While holding the access key and
pressing the SET button, press the
button of the access key.
A chirp sounds once, and the seat position
is registered.
Retrieval of seat position regis-
tered with button 1 or 2
WARNING
Be sure to press the correct button
to retrieve your registered seat
position. If the seat position is not
optimum for you, it may adversely
affect your driving and may reduce
the effectiveness of the seatbelt.
That could result in an accident
involving serious injury or death.
1. Turn the ignition switch to the ON
position.
2. While the select lever is in the P
position and the parking brake is applied,
press button 1 or 2 .
A chirp sounds and the seat moves to the
registered position. When the seat moves
to the registered position, a chirp will
sound.
NOTE
. If a new position is registered for the
same button, the previously registered
seat position is deleted.
. If the vehicle battery is removed, the
registered seat position is not deleted.
. When the button
1
pressed within 45 seconds after the
driver s door is opened, the registered
Seat, seatbelt and SRS airbags/Front seats
seat position can be retrieved even if
the ignition switch is in the LOCK or
OFF position.
Retrieval of the seat position
registered with access key
1. Hold the registered access key.
2. Unlock the driver s door by pressing
the button or gripping the door handle.
3. Open the driver s door.
A chirp sounds and the seat moves to the
registered position. When the seat moves
to the registered position, a chirp will
sound.
or 2 is
1-7
CONTINUED