Sending A Fax Manually - Fuji Xerox DocuPrint CM215 Series User Manual

Sending a Fax Manually

1
Load the document(s) facing up with top edge in first into the
facing down on the
See also:
• "Loading an Original Document on the ADF" on page 244
• "Loading an Original Document on the Document Glass" on page 245
2
Press the (Fax) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 246
• "Lighter/Darker" on page 248
4
Select OnHook, and then press the
5
Select On, and then press the
6
Enter the fax number by one of the following way.
• Select Fax to, and then press the button. Select Keypad, and then press the
Enter the fax number of the remote fax machine using the
button.
• Press the One-touch button, and then press the
• Press the
button, and then press the
• If the document is loaded on the ADF, press the
• If the document is not loaded on the ADF, press the
setting, and then press the
NOTE:
• Press the (Stop) button to cancel the fax job at any time while sending the fax.
document glass and close the
button.
(Address Book) button, select All Entries, Group Dial, or Search using the
button.
button.
document
button.
numeric
button.
(Start) button.
(Start) button, select the desired
Faxing (DocuPrint CM215 f/CM215 fw Only)
ADF or place a single document
cover.
keypad, and then press the
button.
251