Hummer 2010 H3 Owner's Manual page 68

3-24 Seats and Restraints
Here is how to install a comfort
guide to the safety belt:
1. Pull the elastic cord out from
between the edge of the
seatback and the interior body
to remove the guide from its
storage clip.
Ofrecido por www.electromanuales.com
2. Place the guide over the belt
and insert the two edges of the
belt into the slots of the guide.
3. Be sure that the belt is
not twisted and it lies flat.
The elastic cord must be under
the belt and the guide on top.