Table of Contents
Advertisement
Ofrecido por www.electromanuales.com
Listing All Paired and Connected
Phones
1. Press and release
. The
system responds with Ready
followed by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
3. Say List . The system lists all
the paired Bluetooth devices.
If a phone is connected to the
vehicle, the system will say Is
connected after the connected
phone.
Deleting a Paired Phone
1. Press and release
. The
system responds with Ready
followed by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
3. Say Delete . The system asks
which phone to delete followed
by a tone.
4. Say the name of the phone to
be deleted. If the phone name
is unknown, use the List
command for a list of all paired
phones. The system responds
with Would you like to delete
<phone name>? Yes or No
followed by a tone
5. Say Yes to delete the phone.
The system responds with
OK, deleting <phone name> .
Linking to a Different Phone
1. Press and release
. The
system responds with Ready
followed by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
Infotainment System
3. Say Change phone . The
system responds with Please
wait while I search for other
phones .
If another phone is found,
the response will be
<Phone name> is now
connected .
If another phone is not
found, the original phone
remains connected.
Storing Name Tags
The system can store up to
thirty phone numbers as name
tags that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
Store
Digit Store
Directory
7-17
Advertisement
Chapters
Table of Contents
