Radio; Am-Fm Radio - Hummer 2010 H3 Owner's Manual

Ofrecido por www.electromanuales.com

Radio

AM-FM Radio

Finding a Station
BAND: Press to select FM1, FM2,
AM, XM1, if equipped, or XM2,
if equipped.
Manual Tuning
Single CD Radio:
e
(Tune): Turn to select a radio
station.
Six-Disc CD Radio:
DISP: Turn to select a radio station.
Automatic Tuning
1-6 (Preset Pushbuttons): Press
to select preset stations.
SEEK : Press and release to
go to the previous or next station
and stay there. The radio only stops
at stations with a strong signal.
Press and hold to scan stations or
preset stations.
To scan stations:
1. Press and hold or
than two seconds. SC or SCAN
displays and the radio beeps
once. The radio goes to a
station, plays for a few seconds,
then goes to the next station.
2. Press or again or one of
the pushbuttons to stop
scanning presets.
To scan preset stations:
1. Press and hold or
more than four seconds. PSC or
PSCN displays and the radio
beeps twice. The radio goes
to a preset station, plays for a
few seconds, then goes to the
next preset station.
2. Press or again or one of
the pushbuttons to stop
scanning presets.
Infotainment System
Setting Preset Stations
Up to 30 stations (six FM1, six FM2,
for more
and six AM, six XM1, if equipped,
and six XM2, if equipped), and
equalization settings for each
station can be programmed on the
six numbered pushbuttons.
To program presets:
1. Turn the radio on.
2. Press BAND to select FM1,
FM2, AM, or XM1 or XM2.
3. Tune in the desired station.
for
4. Press AUTO EQ to select the
equalization.
5. Press and hold one of the
six numbered pushbuttons
until the radio beeps once.
6. Repeat the steps for each
pushbutton.
7-5