Bulb Replacement; Halogen Bulbs; Headlamps; Taillamps, Turn Signal, Stoplamps, And Back-Up - Hummer 2010 H3 Owner's Manual

Ofrecido por www.electromanuales.com

Bulb Replacement

For the proper type of replacement
bulbs, see Replacement Bulbs on
page 10 37.
For any bulb changing procedure
not listed in this section, contact
your dealer.

Halogen Bulbs

WARNING
Halogen bulbs have pressurized
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.

Headlamps

To replace a headlamp bulb:
1. Open the hood. See Hood on
page 10 5 for more information.
2. Turn the bulb socket
counterclockwise to remove it
from the headlamp assembly
and pull it straight out.
3. Unplug the electrical connector
by pushing the release tab and
pulling the bulb socket out.
Vehicle Care
4. Replace with a new bulb socket.
5. Reverse steps 1 through 3 to
reinstall.
Taillamps, Turn Signal,
Stoplamps, and Back-Up

Lamps (H3)

A. Stoplamp, Taillamp and Turn
Signal Lamp
B. Back-up Lamp
10-35