Manual models: Control panel operation
ON/OFF
LED power
indicator
Increase
Decrease
turning the heater on
Press the ON/OFF button once, you will hear the electronic ignition sparker. The electronic
ignition stops when the pilot flame is established, the main burner then ignites off the pilot and
will go to the highest setting (refer table above). The blue LED power indicator will stay on,
indicating the heater is in operation.
Flame height may be adjusted after one minute of operation. To change the burner and fan
settings press the UP and DOWN arrows to increase or decrease the flame height.
turning the heater off
Press the ON/OFF button once. The blue LED power indicator will turn off indicating that the
appliance is in the OFF position.
Rinnai New Zealand Ltd.
The relationship between
the flame height and fan
speed is preset and cannot be
independently adjusted.
12
Flame
Fan
Height
Speed
1
high
2
low
3
low
4
low
5
high
6
high
7
high
Neo Operation Manual: 11907-C
03-11