Etr Models: Wireless Controller Programming; Setting The Clock - Rinnai NEO RIB2310N Operation Manual

etr models: Wireless controller programming

Setting the clock

The clock must be set before the programmed timers will operate.
1. With the controller off, press T for two seconds.
2. Using the UP and DOWN button, adjust the hours to the correct time.
Ensure you have the correct time of day (AM/PM). Press OK.
3. Repeat above step to adjust the minutes and day of the week.
UP
OK
A/M T P PWR
DOWN
Period programming
Each day of the week can be programmed for four periods, making a total of 28 programmed
periods. Week setting available:
MO -> TU -> WE -> THU -> FR -> MO TU WE TH FR -> SA -> SU -> MO TU WE TH FR SA SU
A weekday program can be set so the program used is Monday to Friday. Similarly, a weekend
program can be set for Saturday to Sunday.
Factory default settings (Mon-Sun)
If you do nothing to change the programming the default settings (shown below) would be
available if you set it to automatic mode. When in this setting, the heater will automatically turn
itself off depending on the temperatures set (similar to an air conditioning unit).
For example:
If the room temperature at 1am falls below 15 °C, the heater will turn on and stay on until the
room increases above 15 °C.
Time period Start time
Period 1 6:00 am
Period 2 8:30 am
Period 3 5:00 pm
Period 4 10:30 pm
Rinnai New Zealand Ltd.
Temperature
20 °C
15 °C
21 °C
15 °C
15
Neo Operation Manual: 11907-C
03-11