Troubleshooting - JVC KD-SX911R Instructions Manual

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• CD cannot be played back.
• CD sound is sometimes
interrupted.
• Sound is sometimes
interrupted.
• Sound cannot be heard from
the speakers.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening to
the radio.
• "NO DISC" appears on the
display.
• "RESET 8" appears on the
display.
• "RESET 1" – "RESET 7"
appears on the display.
• CD can neither be played
back nor ejected.
• This unit does not work at all.
36
Causes
CD is inserted upside down.
You are driving on rough roads.
The disc is scratched.
Connections are incorrect.
Connections are incorrect.
The volume is turned to the
minimum level.
Connections are incorrect.
Signals are too weak.
The antenna is not connected
firmly.
No CD is inserted.
This unit is not connected to a
CD changer correctly.
The unit may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
Remedies
Insert the CD correctly.
Stop playing CD while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Check the cords and
connections.
Adjust it to the optimum level.
Check the cords and
connections.
Store stations manually.
Connect the antenna firmly.
Insert a CD correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the CD
changer.
Press and hold both CD and
SEL at the same time for several
seconds. ("PLEASE" and
"EJECT" appear on the display
alternately.) When you open the
control panel by pressing 0, be
careful not to drop CD when it is
ejected.
Press the reset button on the
panel holder. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)