Cd Operations; Playing A Cd - JVC KD-SX911R Instructions Manual

Playing a CD

1
Open the control panel.
Note on One-Touch Operation:
When a CD is already in the loading slot,
pressing the CD button turns on the unit and
starts playback automatically.
2
Insert a disc into the loading slot.
3
Close the control panel by hand.
Total playing time of
the inserted disc
Elapsed playing time
DISP
TP
RDS
PTY
7 8 9
The unit turns on,
draws a CD and starts
playback automatically.
The CD indicator lights up.
Total track number
of the inserted disc
Current track

CD OPERATIONS

10 11 12 MO
Notes:
• When a CD is inserted upside down, "PLEASE" and
"EJECT" appear on the display alternately.
When you open the control panel by pressing 0, the
CD automatically ejects.
• When you play a CD Text, the disc title and performer
appear on the display. Then the current track and
elapsed playing time appears on the display. See also
"Playing a CD Text" (page 19) and "To select the
scroll mode – SCROLL" (page 26).
If a CD Text includes much text information, some may
not appear on the display.
To stop play and eject the CD
Press 0.
CD play stops, the control panel opens, then the
CD automatically ejects from the loading slot.
If you change the source, the CD play also stops
(without ejecting the CD this time).
Notes:
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the CD even when the unit is turned
off.
DAB
17