Sound Adjustments; Adjusting The Sound - JVC KD-SX911R Instructions Manual

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
BAS
(bass)
VOL
(volume) (KD-SX991R)
Indication To do:
BAS Adjust the bass.
TRE Adjust the treble.
FAD* Adjust the front
and rear speaker
balance.
BAL Adjust the left
and right speaker
balance.
II
BBE See "Turning on/off
(only for
the BBE
KD-SX991R)
on page 23.
LOUD Boost low and high
frequencies to
(only for
KD-SX911R)
produce a well-
balanced sound
at low volume
level.
VOL Adjust the volume.
* If you are using a two-speaker system, set the fader
level to "00."
20
Each time you press the button,
the adjustable items change as
follows:
TRE FAD
(treble) (fader)
BBE / LOUD II BAL
(balance)
(loudness)
(KD-SX911R)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
II function" 1, 2, 3, OFF
LOUD ON
|
LOUD OFF
00 (min.)
|
50 (max.)
2
Adjust the level.
Equalization pattern changes as you adjust the
bass or treble.
Note:
Normally, the control dial works as the volume
control. So you do not have to select "VOL" to adjust
the volume level.
To increase the level.
To decrease the level.