JVC KD-SX911R Instructions Manual page 32

3
Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service you want to listen to.
MO
Press 5 (RND MO) to select
the next service.
Press ∞ (RPT) to select the
previous service.
32
Press ¢
to search
ensembles of higher
frequencies.
Press 4
to search
ensembles of lower
frequencies.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to change the display information,
press DISP.
Each time you press the button, the following
information appears on the display for a while.
Service name
Ensemble name
Channel number
Frequency
To tune into a particular ensemble without
searching:
1 Press and hold DAB (FM AM) to select DAB
tuner as the source.
2 Press DAB (FM AM) repeatedly to select the
DAB band (DAB1, DAB2 or DAB3).
3 Press and hold ¢
than 1 second.
4 Press ¢ or 4
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
To restore the FM/AM tuner
Press and hold DAB (FM AM) again.
or 4
for more
repeatedly until the