Troubleshooting - JVC KD-LX100 Instructions Manual

TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
!/
Causes
CD is inserted upside down.
You are driving on rough roads.
centre.
Symptoms
• CD cannot be played back.
• CD sound is sometimes
interrupted.
• Sound cannot be heard from
the speakers.
CD is scratched.
Connections are incorrect.
The volume level is set to the
minimum level.
Remedies
Insert the CD correctly.
Stop CD play while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Adjust it to the optimum level.
Connections are incorrect. Check the cords and
connections.
• SSM (Strong-station Signals are too weak. Store stations manually.
Sequential Memory)
automatic preset does not
work.
• Static noise while listening to The antenna is not connected Connect the antenna firmly.
the radio, firmly.
• "NO DISC" appears on the No CD is in the magazine. Insert CD.
display.
• "RESET 8" appears on the This unit is not connected to a
display. CD changer correctly.
• "RESET 1" - "RESET 7"
appears on the display.
• "EJECT ERR" appears on the
display and CD cannot be
ejected.
• No message appears on the
display but CD cannot be
ejected.
The CD player may function
incorrectly.
The built-in microcomputer may
function incorrectly due to noise,
etc.
• This unit does not work at all.
• The CD changer does not
work at all.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
Press the reset button of the
CD changer.
Press and hold I_._ _r" for
more than 5 seconds.
While holding _. _,-_i, press the
reset button. Release the reset
button, then release A _1.
(Be careful not to drop the CD
when ejecting.)
Press the reset button on the
front panel. (See page 2.)
27