JVC KD-SX911R Instructions Manual page 23

5
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
6
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.
Turning on/off the BBE
(only for KD-SX991R)
The BBE II * function restores the brilliance and
clarity of the original live sound in recording,
broadcasts, etc.
When a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds. The BBE
function adjusts the phase relationship between
the low, mid and high frequencies by adding a
progressively longer delay time to the low and
mid frequencies, so that all frequencies reach the
listener's ears at the proper time.
In addition, the BBE II function boosts low and
high frequencies, which loudspeakers tend to be
less efficient in reproducing, through dynamic,
program-driven augmentation. When combined
with the phase compensation feature, the
resulting sound has a clearer, more finely
detailed "live" presence.
As you turn the control dial clockwise in step 3 on
the previous page, the BBE
follows:
BBE 1 BBE 2
BBE OFF
As the number gets higher, the BBE
becomes stronger.
When shipped from the factory, the BBE
is set to "BBE 2."
II
To cancel the BBE function, select "BBE OFF."
* Under license from BBE Sound, Inc.
is a trademark of BBE Sound, Inc.
R
II function
II
II function changes as
BBE 3
II function
II
function
23