Using The Bluetooth® Devices; Connecting A New Bluetooth Device - JVC GET0602-001A Instruction Manual

Using the Bluetooth® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA200 (not supplied) to the CD
changer jack on the rear of this unit.
• Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check the countries where you may use the Bluetooth ® function.
To use a Bluetooth device through the unit (" Bluetooth PHONE" and " Bluetooth AUDIO") for the first time,
you need to establish Bluetooth wireless connection between the unit and the device.
• Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be
registered in total.
• Only one device can be connected at a time for each source (" Bluetooth PHONE" and " Bluetooth AUDIO").

Connecting a new Bluetooth device

Registration (Pairing) methods
Use either of the following items in <Bluetooth> menu to register and establish the connection with a device.
• Select " Bluetooth PHONE" or " Bluetooth AUDIO" as the source to operate <Bluetooth> menu.
Open Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating the Bluetooth device.
Search Make the unit ready to establish a new Bluetooth connection. The connection is established by
operating this unit.
• To register a device using <Open> or <Search>,
• To connect a special device,
• To connect/disconnect/delete a device,
Changing the display information
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English website only).
38
28.
28.
( 53)
27.