Using The Bluetooth Cellular Phone - JVC GET0602-001A Instruction Manual

Using the Bluetooth cellular phone

Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
Voice Dialing
Activates <
function. (Hold)
~
Press [SOURCE], then press [Bluetooth PHONE].
Ÿ
Press [ ].
!
Press [Bluetooth].
⁄
Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu). ( 26 – 28)
When a call comes in...
The source is changed to " Bluetooth PHONE"
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 28)
When <Auto Answer> is deactivated...
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
or VOL +/–).
[5 / ∞]: Selects the
other registered device.
SOURCE
Connected Device Name
FLAT
3:00
AM
Dial Menu
Display <
>
• Appears on any source information screen
when the Bluetooth adapter is connected.
Connected device name
• When a cellular phone with audio function
is registered/connected,
Bluetooth icon
> screen.
• Lights up when the Bluetooth adapter
is connected.
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
or VOL +/–).
• You can adjust the microphone volume,
To make a call, use <Dial Menu>. (
EXTERNAL DEVICES
appears.
28.
26)
Continued on the next page
39