Using The Bluetooth® Devices - JVC KD-R601 Instructions Manual

Selecting the playback modes
You can use only one of the following playback modes
at a time.
1
2
[Turn]
REPEAT
3
[Turn]
TRACK RPT : Repeats current track
FOLDER RPT : MP3/WMA: Repeats current
folder
FOLDER RND : MP3/WMA: Randomly plays
all tracks of current folder,
then tracks of next folders
ALL RND : Randomly plays all tracks
• To cancel repeat play or random play, select
"RPT OFF" or "RND OFF."
• To return to the previous menu, press BACK.
14 OPERATIONS & EXTERNAL DEVICES
=
[Press]
Ô
RANDOM
=
[Press]
Using the Bluetooth ®
devices
For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
CD changer jack on the rear of this unit.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth ®
function.
To use a Bluetooth device through the unit
("BT-PHONE" and "BT-AUDIO") for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source ("BT-PHONE" and "BT-AUDIO").
See pages 34 and 35 about warning messages for
Bluetooth operations.
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select "BT-PHONE" or "BT-AUDIO" as the source to
operate the Bluetooth menu.
OPEN Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.