JVC GET0602-001A Instruction Manual page 84

Menu item
Monitor Type *
16:9
4:3PS
OSD Position *
File Type * 6
DivX Regist.
(Registration) *
iPod Artwork *
D. (Digital) Audio Output *
6
* Selectable only for "DISC/USB." (Playback stops when you change the setting.)
7
* For KW-AVX726/KW-AVX725/KW-AVX724.
8
* Skip the track so that your setting takes effect.
14
6
Select the monitor type to watch a wide screen picture on the external
monitor.
4:3LB
♦
16:9
♦
4:3LB
(Letterbox)/
4:3PS (Pan Scan)
6
Select the position of the on-screen bar. (
♦
1
♦
2
Select the playback file type when a disc/USB contains different types of
files. You can store this setting separately for each source—
"DISC/USB." *
♦
Audio
♦
Still Picture
♦
Video
♦
Audio&Video
This unit has its own Registration Code. Once you have played back a file
6
with which the Registration Code recorded, this unit's Registration Code
is overwritten for copyright protection.
7, 8
* While playing back a track (in "HEAD MODE"), Artwork recorded for the
track is displayed on the monitor.
♦
Off
♦
On
6
Select the signal format emitted through the DIGITAL OUT (optical)
terminal. (
♦
PCM
♦
Dolby D
♦
Stream
Selectable setting/item
: Select when the aspect ratio of the external
monitor is 16:9.
: Select when the aspect ratio of the external
monitor is 4:3.
: Higher position.
: Lower position.
7
: Plays back audio files.
: Plays back JPEG files.
: Plays back DivX/MPEG1/MPEG2 files.
: Plays back audio files and DivX/MPEG1/MPEG2 files.
: Cancels.
: Activates Artwork display. To display the artwork,
press DISP repeatedly.
• It takes 5 seconds or more to display an
Artwork and no operations are available while
loading it.
49)
: Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital or MPEG
Audio, or when connecting to a recording device.
: Select this when connecting an amplifier or a
decoder compatible with Dolby Digital.
: Select this when connecting an amplifier or a decoder
compatible with Dolby Digital or MPEG Audio.
33)