JVC GET0602-001A Instruction Manual page 17

Menu item
Down Mix * 9
D. (Dynamic)
Range Compres.
(Compression) *
IF Band Width
Area Setting
Sirius ID * 10
AV Input * 11
9
* Selectable only for "DISC/USB." (Playback stops when you change the setting.)
10
* Appears only when a SIRIUS Satellite Radio is connected.
* 11
Not selectable when "AV-IN" is selected as the source.
* 12
The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in <Full> aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitor panel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT jacks.
♦
Dolby Surr. : Select this to enjoy multi-channel surround audio by
♦
Stereo : Normally select this.
You can enjoy a powerful sound at a low volume level while playing Dolby Digital
software.
♦
9 Auto : Select to apply the effect to multi-channel encoded
♦
On : Select to always use this function.
♦
Auto : Increases the tuner selectivity to reduce interference noises
♦
Wide : Subject to the interference from adjacent stations, but
♦
US : When using in North/Central/South America. FM/AM
♦
Europe : When using in any other areas. FM/AM intervals are set to
♦
SA : When using in South American countries where FM interval
Your SIRIUS identification number appears on the monitor.
You can determine the use of LINE IN and VIDEO IN jacks. (
♦
Off : Select when no component is connected ("AV-IN" is
♦
iPod (Off) : Select when connecting the iPod/iPhone using the USB
♦
Audio&Video : Select when connecting an AV component such as a VCR.
♦
Audio : Select when connecting an audio component such as a
♦
Camera * 12
: Select when connecting a rear view camera to display the
♦
Navigation : Select when connecting a Navigation System. (
Selectable setting/item
connecting an amplifier compatible with Dolby Surround.
software.
between adjacent stations. (Stereo effect may be lost.)
sound quality will not be degraded and the stereo effect
will remain.
intervals are set to 200 kHz/10 kHz.
50 kHz (100 kHz during auto search)/9 kHz.
is 100 kHz. AM interval is set to 10 kHz.
skipped while selecting the source).
Audio and Video cable for iPod/iPhone. (
portable audio player.
picture (as it is taken).
47)
45)
47)
Continued on the next page
AV MENU 17