Replacement 35 OPERATOR PANEL (PL1.2.97)
9)
Replace the OPERATOR PANEL to the FRONT COVER and secure at the four hooks.
10) Engage the connector (P/J220) of the OPERATOR PANEL, and then fix the core of the HAR-
NESS ASSY OPEPANE with the clamp.
11) Replace the BRACKET HARNESS by mating the lug on the BRACKET HARNESS with the
hole of the FRONT COVER,
12) Secure the BRACKET HARNESS to the FRONT COVER using the one screw (silver, tap,
8mm).
Go to the next replacement step:
Replacement 36 CHUTE ASSY EXIT OUT (PL6.1.1)
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
9)
3 - 139
10)
12)
11)
Kmy03073KA