Dell 3110cn Service Manual page 364

Replacement 11 INTERLOCK SWITCH (PL9.1.3)
1)
2)
1) Replace the INTERLOCK SWITCH by mating the hole on the INTERLOCK SWITCH with
the boss on the printer.
2) Secure the INTERLOCK SWITCH to the printer using the one screw (silver, tap, 16mm).
3) Route the harness of the INTERLOCK SWITCH to the DUCT DRV MAIN.
4) Replace the clamp that fixes the harness of the INTERLOCK SWITCH to the SHIELD LVPS.
5) Engage the connector (P/J44) of the INTELOCK SWITCH to the LOW VOLTAGE POWER
SUPPLY.
Go to the next replacement step:
Replacement 16 TOP COVER (PL1.1.1)
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
3)
3 - 90
4)
5)
Kmy03110KA